|
Fourteen
detector types
are available for mounting on the
SRI Models 8610C, 310 and 110 mainframe chassis. Up to four detectors
may be mounted and used simultaneously, although some rare combinations
of detectors may conflict because of space limitations. Each detector
is equipped with a thermostatted heater block for temperature stability,
electronic pressure controlled ( EPC ) support gases, such as hydrogen
and air for the FID, and internal amplifier electronics. Detector
types are selected by the user depending on the particular measurement
application, detection limit required, matrix interferences, and/or regulatory
guidelines. All detectors require factory installation.
Detector types are:
1) CCD ( catalytic combustion detector
)
2) TCD ( thermal conductivity detector
)
3) FID ( flame ionization detector
)
4) FID/DELCD ( combination FID and
dry electrolytic conductivity detector )
5) HID ( helium ionization detector
)
6) NPD ( nitrogen-phosphorus detector
)
7) NPD/DELCD ( combination NPD and
dry electrolytic conductivity detector )
8) TID ( thermionic ionization detector
)
9) ECD ( electron capture detector
)
10) PID ( photo ionization detector
)
11) FPD ( flame photometric detector
)
12) FID/FPD ( combination FID and
FPD )
13) Dual FPD ( dual wavelength FPD
for both sulfur and phosphorus )
14) FID dual FPD ( dual FPD plus FID
combination )
|
|
