|
The
Model 8610C Gas Chromatograph is our most popular model. While it
is very compact
compared to
comparable laboratory GCs from other manufacturers, it is large enough
and flexible enough to perform an amazing variety of applications.
Up to 4 detectors, from a choice of 14, can be mounted simultaneously.
Up to 5 injector types, from a choice of 15, can be installed at the same
time. The 8610C can control up to 16 heated zones, 3 gas sampling
valves, and 7 EPC gas
pressures.
Virtually any EPA or ASTM method can be implemented on the 8610C chassis,
while still remaining small enough to ship as airline baggage or FedEx.
The 8610C column oven is
temperature
programmable from ambient to 400°C with unlimited ramps and holds and
fast cool-down. While smaller than full-sized lab GCs, the column
oven still holds a standard 7 inch diameter megabore column cage, or multiple
columns with smaller coil sizes. All gases, carrier and detector,
are controlled by electronic pressure regulators ( EPC ) for maximum precision,
and the carrier gas pressure is programmable. The PeakSimple data
system is built in for easy serial port connection to your notebook or
desktop PC.
8610-0003 Model 8610C chassis with
Std. Equip. 120 volt AC $4,995.00
8610-2203 Model 8610C chassis with
Std. Equip. 220 volt AC $4,995.00
Standard equipment: Model
8610C chassis, ambient to 400ºC programmable column oven,
on-column injector with carrier
gas EPC, PeakSimple data system ( with detector ), "at a glance"
display of voltages, pressures
and detector parameters, operator's manual, accessory kit, and heavy-duty
re-useable shipping container. To completely configure a Model 8610C
gas chromatograph, most users will need to specify one or more detectors,
injectors, and column. Some users may also need an installation kit
for each gas required for system operation ( hydrogen, helium , etc. ). |
|
