|
The
Model 203 Chromatography Data System consists of PeakSimple for Windows/Windows
95 software plus a single channel 20-bit high resolution A/D board.
The 203 system can be mounted inside the Model 8610C or 310 GC, or it can
be mounted in a separate box for connection to other vendor's GC or HPLC
detectors. When mounted in an SRI GC, the 203 controls the temperature
program of the column oven and the pressure program of the carrier gas
electronic pressure
controller (
EPC ). The eight available TTL outputs are connected internally within
the GC to control functions such as valve rotation, gas solenoid actuation,
autosampler injection, etc. When mounted in a separate box, the temperature
and pressure control outputs are available for use, but not connected to
anything, and the eight TTL outputs can optionally be wired to a bank of
eight
single-pole,
dual-throw mechanical relays with screw terminals ( part# 8600-1056 ) for
easy
connection to
any user device which operates from a contact closure. A remote start input
allows run initiation from the user's GC or HPLC system. Data can be acquired
at rates up to 50 Hz. Windows 95 computers with two available serial
ports ( bus mouse installed ) can operate dual 203 systems, or a 203 and
a 202 simultaneously. The 220 volt system is supplied with a UL,
CSA, and CE/VDE approved universal voltage input power supply which will
operate on any AC voltage from 100-250 volts. The extra cost of this
power supply adds $100.00 to the list price for the 220VAC version.
8600-1055 Model 203 Chromatography
Data System with
Peaksimple for Windows/Windows
95 software
mounted in a sturdy low-profile
chassis ( 120VAC )
$1,395.00
8600-1255 Model 203 system 220VAC
( same as above ) $1,495.00
8600-1056 Optional eight position,
single-pole dual-throw ( SPDT )
relay board with screw terminals
for interfacing with
auto-samplers, valves and other
devices which require
a contact closure rather than
a TTL signal
$ 195.00
|
|
