|
Model
210 HPLC System
|
92-95
|
|
|
|
|
|
|
- Isocratic
or optional binary gradient (6000psi)
- UV detector
with 254nm photodiode
- Rheodyne
7725i injection valve with remote start
- 1 channel
PeakSimple data system
- Optional
conductivity detector
|
|
| Excellent for
both quality control and educational applications, the SRI Model 210
educational HPLC is a complete, entry-level HPLC system in an economical
package. Everything you need is inside the compact, rugged, field
portable chassis. Most controls used during analysis are conveniently
located in a compartment on the right-hand side of the 210. This compartment
is accessed by loosening two captive thumbscrews and lifting off the
cover. |
|
|
| The
210 comes standard with a fixed wavelength UV detector and a built-in,
single channel PeakSimple data system. If you choose to add the optional
Conductivity detector, you can toggle between it and the UV detector
on the single channel data system. If both detector signals need to
be viewed simultaneously, upgrade to the four
channel serial data system or six channel
USB data system. An additional benefit to the data system upgradethere
will be two to four extra channels available for external detectors,
which can be easily connected to the customer access terminals on
the left-hand side of the 210. |
 |
|
|
|
The UV detector
operates at the standard fixed 254nm wavelength.
This chromatogram
shows the analysis of a mix of Polycycylic Aromatic Hydrocarbons
by the UV detector in the Model 210.
|
|
|
| The SRI
Model 210 HPLC System includes: |
| Single
channel PeakSimple data system |
| Stainless
steel pump head(s): |
Flow
from 0.1 to 5mL/minute
Piston flush for longer seal life
6000psi rating
|
| Rheodyne
injection valve with remote start |
| Prime/purge
valve |
| Pressure
gauge (0-6000psi) |
| 254nm standard
fixed UV detector |
| Optional: |
Conductivity
detector
360nm photodiode for UV detector
Second pump for binary system
Data system upgrade
|
|
|
All
for $5,995...Compare to $12,000 elsewhere
|
|
Upgrade
and get a Binary Gradient system for under $10,000
|
|
|
Gradient
Upgrade
Unlike
other HPLC systems, the SRI Model 210 gradient upgrade can be performed
by the user, in the field, in about an hour. All the necessary wiring
is already included with the base isocratic system. All the upgrade
requires are just a few screws and plumbing connections to add the
second pump head and circuit board.
|
| |
| |

Reusable shipping
container
|
|
| |
| The
210 is field portable. The entire HPLC can run off the 13.8 volt DC
power from the cigarette lighter in your vehicle. Whether you are
performing analyses in the jungle, desert, or city, the 210 can go
with you. It can be transported around the world in the rugged reusable
shipping container (shown above), which is small enough to travel
as airline baggage. |
|
| |
The Model
210 is designed for easy one-person transport in the field.
|
|
|
0210-1001
|
Optional
Conductivity Detector |
$
1,195.00
|
| 0210-0300 |
Upgrade
to Binary Gradient |
$
2,995.00
|
| 0210-3600 |
Optional
360nm photodiode for UV detector |
$
495.00
|
| 0210-1500 |
Column:
15cm x 4.1mm, 5 micron C18 |
$350.00
|
|
|
| Model
210 HPLC System |
92-95
|
|
|
|
|